Thin Wall Heat Shrink Tubing Specification Range Optional Extruder Model
1. The main equipment components:
heat shrinkable tube extruder – extrusion mold – cooling&shaping water tank -roll tractor
Auxiliary Machine; Winder Machine&Plying Machine, Splitter
Model SJ-30 for Φ0.5-Φ10mm, 5-20mtrs/min
Model SJ-45 for Φ6-Φ20mm, 8-40mtrs/min
2. The main equipment components:
heat shrinkable tube extruder – extrusion mold – cooling&shaping water tank-belt tractor–winding machine
Model SJ-50 for Φ20-Φ40mm, 5-20mtrs/min
Model SJ-55 for Φ30-Φ60mm, 5-18mtrs/min
3. The main equipment components:
heat shrinkable tube extruder – extrusion mold – cooling&shaping water tank-belt tractor–winding machine/winding machine&plying machine
Model SJ-65 for Φ60-Φ120mm, 4-10mtrs/min
Model SJ-75 for Φ100-Φ180mm, 4-10mtrs/min
4. The main equipment components:
heat shrinkable tube extruder – extrusion mold – cooling&shaping water tank-belt tractor-winding machine&plying machine/cutting machine
Model SJ-90 for Φ150-260mm, 3–10mtrs/min
Model SJ-120 for Φ200-Φ300mm, 3-10mtrs/min
Heat shrink thin wall tube extrusion production equipment introduction:
1. The extruder models are:
SJ-30 extruder, SJ-45 extruder, SJ-50 extruder,
SJ-55 extruder, SJ-65 extruder, SJ-75 extruder,
SJ-90 extruder, SJ-120 extruder.
2. Heat shrink tube extrusion mold:
Within a certain range, molds of different specifications can be replaced to produce products of different specifications.
3. There are two types of cooling and shaping water tanks:
Immersion cooling and shaping water tank and vacuum cooling and shaping water tank.
Immersion cooling and shaping water tank is mainly used for extrusion cooling and shaping of small size heat-shrinkable pipes, The vacuum cooling and shaping tank is mainly used for extrusion cooling and shaping of large size heat-shrinkable tubes.
4. Tractors are divided into two types:Twin-roll tractor (composed of two pairs of rubber rollers) is mainly used for extrusion and traction of small size heat-shrinkable tubes,Crawler tractor (two traction tracks composed of rubber belt or rubber block) is mainly used for extrusion and traction of large size heat-shrinkable pipes.
5. Winder:Large-diameter reels are used to prepare for the next step (preparation for electron accelerator irradiation), Small-sized heat-shrinkable tubes need to be folded on the upper wall, and then split after irradiation.
6. The extrusion production line is equipped with automatic vacuum feeding machine Equipped with drying hopper, the models are: 25KG, 50KG, 75KG, 100KG
Plastic Extruder | Heat Shrink Tubing Extruder/Extrusion Line | Heat Shrink Tubing Expander/Expansion Line | Heat Shrink Tubing Extruder | Heat Shrink Tubing Expander | Heat Shrink Tubing Processing Equipment | Heat Shrink Equipment | Optical Fiber Heat Shrink Tube Extrusion Machine | Extruder for Tube of Evaporators and Condensers | PVC/PP/PE/EVA tubing Extruder/Expander | extruder/expander for heat shrink tubing | Plastic Expander | Extruder/Expander of Single-wall Tubing | heat shrink Extruder | Heat shrink Expander | heat-shrink tube extruding machine | Heat shrinkable tube expanding machine
