WOLJIA has extensive experience manufacturing extrusion lines to process a wide range of Fluorocarbons and High Temperature materials including but not limited to:
PVDF/FEP/ETFE/PEEK/Specialty Nylons/PFA/PA 6/PA6/6
Fluorocarbons and High-temperature Tubing Extrusion Lines
More and more industries and applications are using Fluorocarbons and High Temperature Materials because of their superior properties such as abrasion resistance, low-friction and chemical resistance including:
* Medical & Pharmaceutical
* Engineering Polymers
* Semi-Finished Products
* Oil & Gas
* Wire & Cable
* Tube & Hose
* Automotive
* Packaging
* Medical & Pharmaceutical
* Engineering Polymers
* Semi-Finished Products
* Oil & Gas
* Wire & Cable
* Tube & Hose
* Automotive
* Packaging
Heat shrink tube production equipment, heat shrink tube expanding machine, heat shrink tube expanding equipment, PE/EVA heat shrink tube production line, double wall heat shrink tube production equipment with rubber, PE high iron heat shrink tube production equipment, electronic tube heat shrink tube production, terminal heat shrink tube production equipment, EVA fiber heat shrink tube production equipment, low pressure heat shrink tube production equipment, heat shrink tube production equipment, Electric high pressure heat shrink tube production equipment, FEP/PEEK medical heat shrink tube expanding machine, PE packaging protection heat shrink tube production equipment.
LIU
Prof
Fluorocarbons and High-temperature Tubing Extrusion Lines
Heat shrink thin wall tube extrusion production equipment introduction:
1. The extruder models are: SJ-30 extruder, SJ-45 extruder, SJ-50 extruder, SJ-55 extruder, SJ-65 extruder, SJ-75 extruder, SJ-90 extruder, SJ-120 extruder. 2. Heat shrink tube extrusion mold: Within a certain range, molds of different specifications can be replaced to produce products of different specifications. 3. There are two types of cooling and shaping water tanks: Immersion cooling and shaping water tank and vacuum cooling and shaping water tanks. The immersion cooling and shaping water tank is mainly used for extrusion cooling and shaping of small-size heat-shrinkable pipes, The vacuum cooling and shaping tank is mainly used for extrusion cooling and shaping of large-size heat-shrinkable tubes. 4. Tractors are divided into two types: Twin-roll tractor (composed of two pairs of rubber rollers) is mainly used for extrusion and traction of small size heat-shrinkable tubes, and Crawler tractor (two traction tracks composed of rubber belt or rubber block) is mainly used for extrusion and traction of large size heat-shrinkable pipes. 5. Winding Machine: Large-diameter reels are used to prepare for the next step (preparation for electron accelerator irradiation), 6. Small-sized heat-shrinkable tubes need to be folded on the upper wall and then split after irradiation. 7. The extrusion production line is equipped with an automatic vacuum feeding machine Equipped with a drying hopper, the models are: 25KG, 50KG, 75KG, 100KG
PVDF/FEP/ETFE/PEEK/Specialty Nylons/PFA/PA 6/PA6/6
Fluorocarbons and High-temperature Tubing Extrusion Lines
More and more industries and applications are using Fluorocarbons and High-Temperature Materials because of their superior
properties such as abrasion resistance, low-friction, and chemical resistance including:
* Medical & Pharmaceutical
* Engineering Polymers
* Semi-Finished Products
* Oil & Gas
* Wire & Cable
* Tube & Hose
* Automotive
* Packaging
Fluorocarbons and High-temperature Tubing Extrusion Lines
More and more industries and applications are using Fluorocarbons and High-Temperature Materials because of their superior
properties such as abrasion resistance, low-friction, and chemical resistance including:
* Medical & Pharmaceutical
* Engineering Polymers
* Semi-Finished Products
* Oil & Gas
* Wire & Cable
* Tube & Hose
* Automotive
* Packaging
The main equipment components: heat shrinkable tube extruder – extrusion mold – cooling&shaping water tank -roll tractor Auxiliary Machine; Winder Machine&Plying Machine, Splitter
Model SJ-30 for Φ0.5-Φ10mm, 5-20mtrs/min
Model SJ-45 for Φ6-Φ20mm, 8-40mtrs/min
The main equipment components: heat shrinkable tube extruder – extrusion mold – cooling&shaping water tank-belt tractor–winding machine
Model SJ-50 for Φ20-Φ40mm, 5-20mtrs/min
Model SJ-55 for Φ30-Φ60mm, 5-18mtrs/min
The main equipment components: heat shrinkable tube extruder – extrusion mold – cooling&shaping water tank-belt tractor–winding machine/winding machine&plying machine Model SJ-65 for Φ60-Φ120mm, 4-10mtrs/min
Model SJ-75 for Φ100-Φ180mm, 4-10mtrs/min
The main equipment components:
heat shrinkable tube extruder – extrusion mold – cooling&shaping water tank-belt tractor-winding machine&plying machine/cutting machine
Model SJ-90 for Φ150-260mm, 3–10mtrs/min
Model SJ-120 for Φ200-Φ300mm, 3-10mtrs/min
Heat Shrink Expansion Production Line
Expander/Expansion Line for Thin Wall Heat Shrink Tubing
Expansion production line for Thin Wall Tubing, Busbar Sleeve, Dual Wall Tubing, Medium/Heavy Wall Tubing, Insulated Tubing, Productive Tubing
KZJ20-3 1 out of 3 Single-Wall Expansion Machine
The kind of Expander can expand three different specifications or three tubes of the same specification at the same time KZJ50-2The kind of Expander can expand two different specifications or two tubes of the same specification at the same time
KZJ20-3 1 out of 3 Single-Wall Expansion Machine
The kind of Expander can expand three different specifications or three tubes of the same specification at the same time KZJ50-2The kind of Expander can expand two different specifications or two tubes of the same specification at the same time
Heat Shrink Expansion Production Line
Expander/Expansion Line for Thin Wall Heat Shrink Tubing
Expansion production line for Thin Wall Tubing, Busbar Sleeve, Dual Wall Tubing, Medium/Heavy Wall Tubing, Insulated Tubing, Productive Tubing
Heat shrinkable tubing expansion production line equipment introduction:
This production line uses glycerin as a heat conduction medium, Expansion, and set equipment are carried out by combining negative
pressure (vacuum) and positive pressure (inner air).
It mainly consists of the following parts:
1. Unwinding stand: made of the square tube or section steel, the unwinding reel rotates freely on it
2. Tube billet traction and feeding part: driven by the motor, the rubber roller feeds the tube billet into the glycerin box
3. Glycerin heating box: electric heating of glycerin to heat the tube blank, so that the irradiated tube blank reaches a molten high-elastic state
4. The conveying part of the glycerin heating box: the transmission part is driven by the motor to realize the continuous and uniform transportation of the tube billet in the glycerin box
5. Mold positioning part: used to install expansion mold
6. Vacuum control part: control the vacuum size of the mold
7. Water cooling part: control the water volume of the mold, and cool the expanded heat shrinkable tube
8. Traction output part: the motor drives the rubber roller to pull and output the expanded heat-shrinkable tube
9. Finished product transmission output
pressure (vacuum) and positive pressure (inner air).
It mainly consists of the following parts:
1. Unwinding stand: made of the square tube or section steel, the unwinding reel rotates freely on it
2. Tube billet traction and feeding part: driven by the motor, the rubber roller feeds the tube billet into the glycerin box
3. Glycerin heating box: electric heating of glycerin to heat the tube blank, so that the irradiated tube blank reaches a molten high-elastic state
4. The conveying part of the glycerin heating box: the transmission part is driven by the motor to realize the continuous and uniform transportation of the tube billet in the glycerin box
5. Mold positioning part: used to install expansion mold
6. Vacuum control part: control the vacuum size of the mold
7. Water cooling part: control the water volume of the mold, and cool the expanded heat shrinkable tube
8. Traction output part: the motor drives the rubber roller to pull and output the expanded heat-shrinkable tube
9. Finished product transmission output
WOLJIA designs and manufactures complete extrusion&expansion lines for producing Heat Shrink Tubing including pelletizers, extruders, expanders, tooling, and all auxiliary machines.
WOLJIA can offer you the most suitable product solution based on your demands, and customize your heat shrink tubing production line.
